¡Hola! Soy nuevo en el foro, así de antemano perdonad si esto ya se ha tratado (?) o no es el lugar para preguntar, pero no he sido capaz de encontrar un caso similar al mío (lo más cercano sería este hilo hablando sobre splitters).
Mi situación
Mi objetivo es poder jugar a mis videoconsolas retro (con salida SCART RGB o RCA) en un televisor CRT a la vez que capturo la señal de vídeo con mi capturadora HDMI conectada al ordenador haciendo streaming en directo.
Entiendo que para lograrlo necesito dos salidas de video simultáneas para así poder conectar una al televisor CRT (con entrada SCART RGB) y la otra a la capturadora (entrada HDMI) que iría conectada al PC.
Ya tengo experiencia haciendo streamings con mis consolas retro pues cuento con un conversor de SCART a HDMI que me permite conectar cualquiera de mis videoconsolas a la capturadora y jugar directamente en el PC mientras hago streaming, el problema es que así acabo jugando en pantallas LCD y pierdo la magia de la experiencia en una CRT.
Por eso llego a la conclusión de que me hace falta un splitter, para así poder duplicar la señal que sale de la consola en dos y mandar una a la capturadora y otra al televisor CRT.
Adjunto un par de esquemas para que se entienda mejor:
Splitters que he encontrado
Buscando por internet solo he sido capaz de encontrar dos opciones:
- El 6in3out Amplified RGB Scart Auto Switch de Otaku Games por 65,40€
- El Active SCART Buffer V3 (Amplified splitter) de J.S. Technology por 58,10€[1].
6in3out Amplified RGB Scart Auto Switch
Descripción del producto
This 6in3out Amplified RGB Scart Auto Switch is fully RGB capable and can output via either Euro Scart Out or RCA RGB Out for use with for example PVM/BVM CRT’s. It has auto swichting inputs so no more hassle to switch between the different channels. Be aware not to keep multiple inputs on at the same time to avoid signal interference. This version includes triple amplified output, which means you can simultaneously output to 3 outputs at the same time without picture quality loss. This is great for example for streamers which want to play on a CRT and at the same time record via a capture card at same quality and without any extra lag. For PS1 use make sure to use a proper PS1 scart cable with 220uf caps and it might be neccessary to use a power supply for the switch. Any 9-12V DC power supply can be used (both center negative or positive). Built in Sync stripper. This is why it is not recommended to use Scart cables with built in Sync stripper with this variant of our Scart switches when using OSSC’s, RetroTINK 2x SCART’s and Framemeister.
Este está orientado a ser más un switch (muchas entradas para una sola salida), pero también cuenta con un splitter que además describen para el uso exacto que yo quiero:
This version includes triple amplified output, which means you can simultaneously output to 3 outputs at the same time without picture quality loss. This is great for example for streamers which want to play on a CRT and at the same time record via a capture card at same quality and without any extra lag.
La verdad es que estaba casi convencido de pillarme este, pero la reseña de RetroRGB advirtiendo de que puede causar daños a otros componentes me ha hecho acojonarme un poco…
Por lo que entiendo, solo habría problema si se usan cables SCART con un “sync stripper” integrado, cosa que diría que no tengo (?), pero me da yuyu equivocarme y liarla… También dice que puede ser peligroso conectar dos consolas encendidas a la vez, una cosa que no se debe hacer intencionadamente con los splitters, pero que puede llegar a pasar por despiste y en este caso el dispositivo no parece estar preparado para soportarlo bien.
Active SCART Buffer V3 (Amplified splitter)
Descripción del producto
Now 3D Printed Enclosure! To keep this in production for longer we’re 3D printing the enclosures. The size is now a little bit more compact as we’ve custom fitted to the electronics inside. New photos to follow. The electronics are unchanged.
- New V3 Version for limited time only - depending demand.
- Dual Output from a single SCART source - ideal for TV and projector systems.
- NO DELAY - Buffering is instantaneous.
- Videos signals supported are RGB, S-Video or Composite on SCART.
- Input of SCART from any source such as DVD player or set-top-box.
- Output of two high quality SCART copies of the input. Correct levels are maintained.
- Correct load to the source equipment - Does not overload the source equipment - a flaw of other solutions.
- Output levels are the same as input levels - no loss or variations in brightness - again a flaw of other solutions.
- Audio is fully buffered to maintain audio quality.
- Can also be used for Composite video and other uses.
- Option on Sync Separator. RGBs can give a clean Sync output (at normal video levels) or RGsB (Sync On Green SoG) can be converted to give RGBs output.
The Active SCART Buffer is the solution to connecting two video displays from one source. Each video output is a perfect copy of the input, all video and audio lines buffered. The Active SCART Buffer can be used with other J.S. Technology products as well as other manufacturers.
Superior to simple splitters which merely share the signal between your destinations and subsequently reduce the picture brightness and quality. The Active SCART Buffer regenerates the input video, restoring correct levels for distribution to your two displays. This maintains the brightness of the picture, but also helps to isolate both displays. The load on one will not affect the other.
Buffering is instantaneous. This is an electronics term to mean that you get the same output as the input. There is no storage of the picture, therefore the output is an instant copy of the input signals.
Applications for the Active SCART Buffer are endless. As an example, if you have a projector and TV screen, use the Active SCART Buffer to keep both connected and reduce those hook-up nightmares! Where you require two video outputs and wish to maintain picture quality, the Active SCART Buffer is the solution.
For flexibility with your cabling requirements, the Active SCART Buffer provides standard SCART connectors. This allows for the use of our high quality leads or the flexibility to choose and make leads that meet your individual requirements.
Option on included a Sync Separator for use with vintage arcade equipment and consoles. This was a requested feature that we’ve added to the existing V2 design, making it V3. Provides the ability to convert RGsB (Sync on Green SoG) to RGBs, or normal SCART. Also can clean the RGBs input to provide a sync without picture information if required.
Measuring just 120x98x45 mm with an external power supply, the Active SCART Buffer is compact and easy to use.
Utilising the same high-quality multi-layer fibreglass PCB construction as other J.S. Technology products, and with components from some of the world’s leading manufacturers, this level of quality and detail is not often found at any level. Designed and manufactured by J.S. Technology in the UK.
Este está orientado a ser solo un splitter, y por lo que promete, de buena calidad.
La verdad es que por la descripción creo que cumpliría su papel, pero entre que la web de compra es un poco patatera y que no encuentro casi reseñas por la red[2], estoy dubitativo.
¿Que haríais en mi situación?
Llegado a este punto no se si me compensa más arriesgar con el 6in3out o con el Buffer.
Estoy bastante seguro que pudo prevenir situaciones de riego con el primero (especialmente ahora que las sé), pero lo de ser un switch no me hace especial falta (aunque nunca viene mal) y en principio me sale más caro; el segundo, en cambio, parece que va a hacer exactamente lo que quiero, es más barato, no tiene riesgos (conocidos) y su tamaño es más compacto.
¿Conocéis otros splitters? ¿Tal vez otras opciones para llegar a la misma solución por otro camino?
¡Quedo a la espera de vuestros consejos!
Depende del cambio de libras a euros y el envío ↩︎
Un comentario de Reddit de hace 5 años es lo mejor que he encontrado. ↩︎